by RJH_MUSIC » Tue Feb 21, 2017 11:41 pm
But alas I am not talking about putting the power supply in the console, I am talking about putting just the CPU in the console. Remember that the reason the current CPU is so big is because it also contains the power supply for the console, which is where all the heat is coming from. SO the concept is to build a smaller power supply that would house the BFC, and just put the CPU motherboard, flash drive and peripheral connects inside the console. You would still need 2 boxes, the console and the power supply. If you take a look at the MUSE Receptor, this is what I am talking about in size. the Receptor is basically a computer with a hard drive with built in Audio. It has a motherboard, VGA graphics card, MIDI interface, Keyboard and mouse interface.... all it would need is a CF drive, and the console data cable and the OS. Someday I am going to try this with a RECEPTOR I have. But not until I figure out the Console power supply.
RJ
2 d8b's 5.1 OS all the plugins, Mackie 32.8 Bus, 2 iMAC 27", Apollo 8 Quad, Cubase 9, Logic Pro X, VEP 6, 4 TB of VSTi Libraries, 28 Roland, Yamaha & Korg Synths and Keyboards, NI Hardware and Software.. Plugins, Plugins, and the list goes on...