D8B and Presonus Studio One Pro

[davestrat1]

Anyone out there using Studio One Pro with a D8B? I've been using this set up for 3 months and can't figure out how to get the audimation or position indicator to work (display) with the software. The transport and Jog wheel works fine. What am I doing wrong?

[anyhorizon]

If it has generate or send MTC as an option, that will need to be on, obviously with a midi cable in each direction.

Peter

[jumbodingo]

Hey Dave, I'm currently running D8B and S1 Pro. So .. fill me in on what's not working. My set up has the D8B sending 24 ch lightpipe to the MAudio Profire lightbridge. That's how I get to S1. Firewire out of the Lightbridge to my G5 ( S1) Midi out of the D8B also goes to the lightbridge and back. For transport control I put the D8B into Hui mode. I added a "new control surface" in S1 and it's ports are the Profire lightbridge. I used control link to link the faders of the D8b's tape returns to the 24 mixer channels in my S1 mixer view. I also linked the pan v pots to the pan in the S1 mixer. I can control S1's faders and pans and transport functions but that is all. Although I'm running in Hui mode in the OPTIONS dropdown I don't have the board running in Hui layer. I have enabled Hui layer before and it works fine... control of rec enable,solo,mute, etc. but only 8 channels. Hope that is of help to you.
Brian

[Axeman098]

I nknow the HUI mode only does 8 channels, but can you bank switch???