Can only see every other signal on d8b meters

[Wood]

I have 1/4 mono cable of 8 coming from 003 to mackie d8b, I hear all 8 tracks separated but I can only see 4 on meters, I cannot see 1,3,5,7
Can see
2,4,6,8
Any idea what's going on?
Any help would be appreciated
Thank you

[Bruce Graham]

Hey Wood;

I see you are new, so welcome . This is a great Forum with a lot of memebers who help.
I would start by making sure you are pluged into the Line Inputs on channels 1 through 8 and not the insert I/O. Easy mistake to make.
You would hear the audio but the insert poimtt is after the meters I believe.

Start there and post back. The more info you gibe the better.

Best of luck
Cheers
Bruce

[Wood]

Hi Bruce!
Thanks for your response,
They are in the right ins, I even hooked a mic up XLR to track 1 turned the trim up , I could hear the mic but nothing on seeing level, then I hooked mic up to track 2 XLR , hear and see level,
I can see main out meter from all tracks.
It's making me Nutty! Lol

[Jondav1120]

Hi, and welcome to the forum...

Do you have an UFX or MFX card in the first fx card slot? If you do you could load up a stereo fx patch and try routing a signal through it. This should return on the Effects Bank (Channels 49-52 for the first fx card). If the meters respond when switched to the Effects Bank then the hardware is working as it should.

Regards

John