Change font size   Print view

Time to go

Discussion board for Mackie's d8b Digital Console users.

Time to go

Postby Bruce Graham » Tue Apr 21, 2020 8:09 pm

Hi All;

Just a note to say thanks to everyone here at this wonderful Forum. I have been here since 2011 and it's been a lot of learning, sharing, frustration but fun. In particular "The Crack, or The Hack"! A ground breaking day for sure.

I have been unable to get my d8b to work and no one to fix them who understand our passion for these beasts.

So I am parting them out. There is a post in the For Sale section

I want to say a special thanks to Crash, Any Horizon, Phil.C, Funk, Mike, Mike Rivers, Y-my-R, Joe Allen, Eric Russ (rest in Peace, my friend), and Bob T. The man behind this incredible piece on engineering.

So many others who have helped me and others along the way. Giving of their time and their knowledge in the name of Audio.

I'll drop by from Time-to-Time.

Cheers to all of you.
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: Time to go

Postby captainamerica » Wed Apr 22, 2020 3:17 am

Good luck Bruce
DAW: Genelec 8341,MacStudio, QuantumTB, Faderport16, DP, LogicProX, ProTools.BackupDAW:d8B, MacPro 2008 2xQuad-Core, MOTU (2408)LegacyDAW: A2000, Picasso II, Blizzard 68060@50 MHz|3xAD516 SunRize cards|HydraNexus Amiganet Ethernet.
User avatar
captainamerica
Premium Member
Premium Member
 
Posts: 338
Joined: Thu Nov 27, 2008 5:45 pm
Location: Boston, MA (org. from Montreal, Canada)

Re: Time to go

Postby Y-my-R » Wed Apr 22, 2020 7:18 pm

Sad to see you go, Bruce!

...I did see some of your recent posts, where you just didn't have any luck with getting your desks back in working order... and I'm not much help with these kinds of electrical/component defects, so I didn't have anything to chime in with, sorry. But I understand your decision. If I was in your situation, I'd also invest a reasonable amount of time/money to get my desk(s) to work again, but if "reasonable" doesn't do it, then I'd also move on. I totally get it.

Curious to hear what you'll replace your main D8B with! Once you got that figured out and set up, please report back how your new setup works out for you! The D8Bs aren't getting any newer, and one day we'll all have to move on to something else, I guess... would be nice to have an 'experience report' from someone who comes from the same corner (i.e. D8B), so we all know what we'll be in for :)

Best of luck! We'll miss you, Bruce!
User avatar
Y-my-R
Premium Member
Premium Member
 
Posts: 590
Joined: Mon May 29, 2017 12:14 am
Location: Van Nuys, CA

Re: Time to go

Postby garrett21allen » Sun Apr 26, 2020 12:14 am

bruce you can not go I refuse to let you leave this forum we will put you in jail without a bond if you leave us LOL.
good luck with whatever you go with do you know what you're going to as for recording and mixing we will miss you
thanks for all your help you have given me. Joe Allen
garrett21allen
Premium Member
Premium Member
 
Posts: 517
Joined: Wed Feb 04, 2009 5:54 pm

Re: Time to go

Postby Old School » Mon Apr 27, 2020 3:20 am

So sorry to see you go, Bruce. Best wishes for a great forum member! You WILL be missed!

Blessings to you and your family,
Mike W.
Wanna make God laugh, ...Tell Him your plans
User avatar
Old School
Premium Member
Premium Member
 
Posts: 422
Joined: Thu Jun 16, 2011 8:42 pm
Location: Elm City NC

Re: Time to go

Postby Phil.c » Mon Apr 27, 2020 10:44 pm

Sorry to see you go after all these years Bruce, take care and keep safe.

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Time to go

Postby Crash » Sun May 03, 2020 7:58 pm

Thanks for the shout out Bruce. I feel ya... I too boxed up my d8b a few months back. It was still rock solid and working as good as ever but I rebuilt a dxb and the routing and other features, such as higher sample rates and VST capability made me make the jump. Like you, I still cruise by here and see what is going on from time time but I have retired my d8b for the moment. Best of luck in your future endeavors and we'll see ya down the road.
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1286
Joined: Fri Nov 21, 2008 10:05 pm

Re: Time to go

Postby Bruce Graham » Thu May 07, 2020 7:38 pm

Hi everyone;

After deciding on another desk, Presonus StudioLive Series III SX ($6,000.00 cdn), and ready to order it, I decided to have a look on a auction site called Kijiji and there was a working d8b desk and CPU for $600.00 cdn not too far from me. I contacted the seller, verified it was working and bought it. Had some cosmetic damage, and needed a few things replaced, (8-way fader board), but it works. It was also a 2001 build so hopefully no capacitor issues. The CPU is the newer board so that also helps with a USB Mouse, and a CF Hard drive (I hope).

I know it may sound crazy to have bought it, but at my age (67), if I get a few years out of it I'm good. I can always sell it to one for fellows before I go into the retirement home ;)

All this is to say I really wanted a d8b and although the Presonus would have worked there would have been other stuff to purchase to make it all work.

Sorry for pulling the trigger as little early, and thanks for the comments.

Hope everyone is well in thos COVID19 world we live in.

Cheers from Canada
Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: Time to go

Postby Phil.c » Thu May 07, 2020 11:20 pm

67!.....just a kid:)

Glad you've stuck with the d8b Bruce:)
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Time to go

Postby garrett21allen » Fri May 08, 2020 12:05 am

Hi Bruce So happy your staying with us. We are the same age. I can tell my age every year gets me more pain in different places. Just happy to be a live. Hope this d8b serves you well.

Joe Allen
garrett21allen
Premium Member
Premium Member
 
Posts: 517
Joined: Wed Feb 04, 2009 5:54 pm

Next

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 3 guests

cron