d8b Forum

I' m a newbie

since last week i was a very happy d8b user ( no problem at all ... at least no one that
cannot be repaired with a rebooting )
but now when i power up the mixer the Monitor ( lcd one ) remains black
and after 60 seconds the famous error system 43 appears ....
no boot up ....at all any tips ??????
any little help will be very useful and appreciated !!!

thanks in advance
OroVivo

p.s.
i've already try to switch with another monitor ( no changes video is not showing up )
changed the battery and connect and reconnct the cables
but nothing

Did you re-set the BIOS? there are basically two motherboards, a 166 and a 300. Find out which one you have and follow these instructions to re-set the BIOS. Could be something else, but I would try this first.

http://www.sonido-7.com/d8b/maintenance.html

Weilcome to the forum OroVivo.

Change your RAM sticks. I know it sounds weird but I had this same black screen video problem and it happened to be the RAM.

Peter Holmquist.
PS: Your avatar picture can be up to 150x150 pixels, just in case you want to make it bigger.

Really thank you for your quick responses

and for the welcome ^_^

i'll try today to change to a new Ram and see if it works ... ^_^

thanks again !