d8b Forum

Hi Guys,

So... after 14 years..(actually almost 12 - mackie replaced my original d8b in nov of 2000) it won't boot. error 43
Checked bios..all is good..hd is recognized
Reseated all cables and cards.
When I turn on the mixer..after post.. Monitor says mackie os loading..and stays there when error 43 appears on the console

So I'm assuming it's the HD since the OS (5.1) doesn't load.
I do have an old HD stored away with os 3 on it

Any thoughts on what to do next will be greatly appreciated.

Thanks,
Bruce Brody

Dead battery?

5.1 corrupted?

Thanks Frank and Phil.
My HD was dead. I replaced the battery, put in my old HD with OS 3 and then installed 5.1 on it.
All is well again!!!!!!!!!!!!!!!!!!!!!

Dead HD and you switched over to an older backup drive. Glad it worked...particularly the 5.1 reinstall.

Bullet dodged. You may not have neede a new battery...but it sounded like you haven't changed it out in years. It was due.

It's exactly the specter of this scenario that pushed my paranoia button a month or so ago. It prompted me to finally replace my 14 year old IDE drive with an SSD.

There is a thread on this somewhere in the forum if you are nuts enough to try it. It works.

Yes Frank..bullet definitely dodged
I read the SSD thread and I'm going to do it as well
Thanks,
Bruce

Let us know how it goes.

I will let you know Peter. Hope to get to it later this week.

Don't forget to document it with pictures.

your artice is fine ,thinks!






_____________________________________________________
I like video games and online games,the site is http://www.d3home.com/.