the boss wrote:Hi
You don't need this device to connect this things together.
I have 2 d8b's with 4 x motu 2408 mk3 and a motu mtp.
You need two apogee sync card.
1 set your daw as master.
2 connect your first d8b sync in on apogee card to sync out on your motu card.
3 set first d8b to word clock in.
4 connect first d8b word clock out to apogee world clock in on d8b 2.
5 set d8b 2 to worldclock in.
Set your d8b's to sync sample rates in options.
REMEMBER to always boot up your d8b's first.
After fully boot start the motu interface.
Good luck
the boss wrote:.... Do not use too long opto cables and do not bend. Remember it's opto... If you can use tdif format...
Users browsing this forum: Google [Bot] and 40 guests