Change font size   Print view

I made a big big boo boo

Discussion board for Mackie's d8b Digital Console users.

Re: I made a big big boo boo

Postby garrett21allen » Wed May 25, 2016 3:26 am

Well just checked all three fuses and there is power in all three so the fuses are not bad. On the monitor its showing bank one. If the sizzle went back down to the CPU lol is like it would not show anything on the monitor I could be wrong just thinking out loud Also could it be possible that the big frighten cable touch the round socket that it go s into could it just killed the hole power supply that goes to the big cable again just thinking out loud. If any one can think of anything that you might try is more than welcome.i know it's not easy trying to help me but it's all I got

Thanks joe allen
garrett21allen
Premium Member
Premium Member
 
Posts: 517
Joined: Wed Feb 04, 2009 5:54 pm

Re: I made a big big boo boo

Postby Phil.c » Wed May 25, 2016 9:17 am

Running out of ideas Joe, but have you tried pulling the BFC out and putting it back again...this time with the power off...I guess I didn't need to mention that :D

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: I made a big big boo boo

Postby garrett21allen » Wed May 25, 2016 1:09 pm

Thanks Phil

Yes I really did deserve that and some more because that was a dumb thing I done and can't stop thinking about it.
I do understand about running out of ideals I just hope someone may have had done the same mistake and was able to bring it back to life. The way my luck is though I want be that lucky. And thanks for your input and help and if anyone can think of anything please let me know. This is a great forum weather I get my d8b fixed or not thanks again

Joe allen
garrett21allen
Premium Member
Premium Member
 
Posts: 517
Joined: Wed Feb 04, 2009 5:54 pm

Re: I made a big big boo boo

Postby garrett21allen » Thu May 26, 2016 1:28 pm

Looks like all my hope is gone as I think everyone has ran out of ideals I just hate to loose her after 15 and half years. Please if you can think of anything please let me know. Thanks everyone

Joe allen
garrett21allen
Premium Member
Premium Member
 
Posts: 517
Joined: Wed Feb 04, 2009 5:54 pm

Re: I made a big big boo boo

Postby Bruce Graham » Thu May 26, 2016 2:12 pm

Hi Joe;

Sorry for your troubles!

Eric Russ is all I can think of!

Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: I made a big big boo boo

Postby Phil.c » Thu May 26, 2016 4:28 pm

Me too..Eric Russ is your best bet, if he can't sort it then you need to make new decisions.

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: I made a big big boo boo

Postby garrett21allen » Thu May 26, 2016 6:43 pm

Ha Bruce and Phil

Your both right so i talked to Eric Russ and he told me that ether one of you could donate your d8b to me he said Phil has two in that big console so he would not miss his. LOL. I really did talk with him and I might try to get something from him to work. He did tell me he had a good cpu I just hate to buy that and then still have trouble with the board as I don't know if that sizzle sound hit the board or the CPU or both. Anyway thanks for everyone help and input

Joe allen
garrett21allen
Premium Member
Premium Member
 
Posts: 517
Joined: Wed Feb 04, 2009 5:54 pm

Re: I made a big big boo boo

Postby Bruce Graham » Fri May 27, 2016 2:10 pm

Hi Joe;

Had another thought!

You took your console or CPU, I don't remember which, to someone. Didn't you?

Maybe, if he is willing, take both, connect separately to his and that will help narrow things down. Just another thought? You still will need someone to fix it but at least you will know which! Hopefully not both.

Good luck.

Bruce
Bruce Graham
Premium Member
Premium Member
 
Posts: 717
Joined: Tue Mar 15, 2011 12:02 am
Location: Walkerton, Ontario, Canada

Re: I made a big big boo boo

Postby goonkalonkyn » Fri May 27, 2016 2:44 pm

the first line of "sizzle" or "fried" sound you get from shorting out the pwr connector will come from this:
Attachments
Screenshot_2016-05-27-07-33-17.png
Screenshot_2016-05-27-07-33-17.png (Array MiB) Viewed 896 times
goonkalonkyn
Premium Member
Premium Member
 
Posts: 55
Joined: Sat Oct 10, 2015 4:34 pm

Re: I made a big big boo boo

Postby Phil.c » Fri May 27, 2016 3:56 pm

There's a few bits to the back of that!

Image
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

PreviousNext

Return to d8b Forum

Who is online

Users browsing this forum: Google [Bot] and 4 guests

cron