Host did not Boot

[Blastin]

I'm receiving the "Error 43", host did not boot, attempted to install upgrade (for larger hard drives) and installed 256MB memory, upon turning on HDR, I received the "Error 43", host did not boot. So I removed all cards and reinstalled them and ribbon cables, again I received the "Error 43" after turning on the HDR. Cannot get to CMOS nor BIOS on HDR when keyboard and monitor is connected. I also, removed larger hard drive chip and memory, again "Error 43.

[Bruce Graham]

Hey Blastin;

Error 43 is a communication Error, which generally means a bad connection. Somewhere.

I know it is tedious, but keep trying the ribbon cables, etc. It may take a while but keep at it. You will likely find it.

I was 2 months chasing a bad connection. I eventually found it and all is right in the world.

Cheers
Bruce

[Jondav1120]

Hi Blastin,

Sorry, meant to reply to your question earlier.......

I notice you installed the larger hard drive BIOS upgrade chip (and put it back to the original BIOS chip)....two things to check:
1. Are all the pins on the chip seated in the socket?
2. Is the chip inserted the correct way round?

Both of these will prevent the HDR from booting (which is giving you the error 43!) and will also prevent you accessing the BIOS.

Hope you get it working again!

Cheers

John