by Bruce Graham » Sat Nov 18, 2017 4:47 pm
Hi Jim;
Below is all that is printed on my SATA adaptor.
"HXSP-0908, IDE TO SATA V1.2"
They came in Static free plastic bags withe following printed on the outside
"SKU269484-2Z70 EVK"
0116--0--14795 C-P-11-18"
I think as long as the adaptor (Converter) is SATA II or SATA I it shouldn't matter. These things do not cost much anyway, so I did some trial and error and never had a problem with what I bought. One gave me start up issues, but once started it was fine. All the others just worked!
Hope that helps.
Cheers
Bruce