Routing chanels

[Sellden]

Hi
This exacly what I’m trying to figure out how to route the d8b chanels to the outputs from my motu.
Not the i/o setings the are correct bot assinging one channel on the d8b to the output from the motu

[Sellden]

Hi,
No I want to route motu digital out to d8b digital in
This is not working I can’t here the sound from my mac throu my d8b
Where do I choose digital in on the d8b

[captainamerica]

are you sure you are routing your internal audio setting on your mac (pref/MIDI) to 828?

[Sellden]

Hi captainamerica!
Thanks for all your help yesterday.
Now everything works fine.
Just took me a while to understand that I automatlicly get all signals back on the rape setup. I had switched two cables so i din’t get output on the right place.
I use pro tools as DAW.
Only one strange thing...... Chanel nr 5 on set tape setup is not working no sound i coming back. I have checked every thing but I can’t find any problem.
And the other thing is if I play like youtube on my mac I only get sound in my headphones.
I will send you a little video later so you can see the Chanel problem
Thanks again for all your help
Best Regards
Anders

[captainamerica]

Good....check another ch to make sure.

[Sellden]

Hi again,
No ch 5 is gone, I choose digital out 5-6 stereo in pro tools but just ch 6 on tape return is sounding.
All other 15 chanels ar working.
Chanel 5 is working for line in.
But ch 1-2 on the d8b is not working when I put the microphone in all others are
I have tried everything But still no sound from input 1-2

[captainamerica]

make sure that ch is not been allocated somewhere else in the d8b I/O screen...open the d8b screen to verify

[Sellden]

I go to setup I/o and all Cards are set to adat
I clicked on plugins and there were plugins on ch 1-2
I have taken them away.
Ther were a group routing on ch one cleard that
But still no input