Change font size   Print view

Punch in etc

Discussion board for Mackie's d8b Digital Console users.

Punch in etc

Postby Phil.c » Tue May 10, 2011 9:34 am

I don't know if anyone has experienced this which has just happen on my gear.

When punching in sometimes record does'nt happen, I have to try two or three times.

The same with just recording, I get about a second of actual recording then it stops, if I then hit record when transport is still moving it records?

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Punch in etc

Postby anyhorizon » Tue May 10, 2011 9:55 am

It sounds like time for this.

Peter
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: Punch in etc

Postby Phil.c » Tue May 10, 2011 10:59 am

I don't think it's that Peter, in fact for example, if I have punch in points and I run transport from say 30 seconds before these, I have the recording button light on throughout, it just does'nt record at the punch in, but this is intermitent, ie does'nt always happen.

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Punch in etc

Postby Casey_Pittman » Tue May 10, 2011 7:17 pm

Phil,

I have a similar problem with mine every once in awhile. If I'm recording for a long period of time or I click a window in my DAW, the record button light on the d8b will turn off but I'll still be recording in my software. And sometimes not very often it'll do what you describe.

What are your recording to?

-Casey
d8b V3 into RME HDSP 9652 with Cubase 7.5
User avatar
Casey_Pittman
Premium Member
Premium Member
 
Posts: 342
Joined: Mon Aug 31, 2009 10:51 pm
Location: Texas

Re: Punch in etc

Postby Phil.c » Tue May 10, 2011 9:02 pm

Hi Casey....HDR.

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Punch in etc

Postby Casey_Pittman » Tue May 10, 2011 9:13 pm

Ahh well then our problems probably aren't that related then. Might be a MTC(MMC) communication problem. Has it always done this or just started? Are the midi connections between the two correct?

-Casey
d8b V3 into RME HDSP 9652 with Cubase 7.5
User avatar
Casey_Pittman
Premium Member
Premium Member
 
Posts: 342
Joined: Mon Aug 31, 2009 10:51 pm
Location: Texas

Re: Punch in etc

Postby anyhorizon » Tue May 10, 2011 11:47 pm

Yeah, I was gonna ask, has any MIDI stuff been altered?

Peter
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: Punch in etc

Postby Phil.c » Wed May 11, 2011 9:37 am

No midi alterations.......well, in the past twelve or more years anyway :)

As I said it does'nt always do this?

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Re: Punch in etc

Postby High C Double G » Thu May 12, 2011 9:39 am

HAL doesn't like the part you're punching in, try practicing the part or try a different part; maybe then HAL will let you record. :shock:

You could check your automation it may be that something written there is taking it out of record. I don't have a HDR but some recorders have write protect. Check the mix editor window to be sure something is not "in the way".

Sorry this is the best I can do on this one.

Hope this helps,
Michael
Make some noise!!!
User avatar
High C Double G
Premium Member
Premium Member
 
Posts: 325
Joined: Tue Nov 25, 2008 3:55 am

Re: Punch in etc

Postby Phil.c » Thu May 12, 2011 12:09 pm

I've just noticed...when recording the record button stays lit and recording quits on the HDR, again, as I said before this does'nt always happen.

Phil
User avatar
Phil.c
Premium Member
Premium Member
 
Posts: 1114
Joined: Sun Nov 23, 2008 10:58 pm
Location: South Wales

Next

Return to d8b Forum

Who is online

Users browsing this forum: No registered users and 6 guests