Change font size   Print view

my mackie d8b tilt

Discussion board for Mackie's d8b Digital Console users.

my mackie d8b tilt

Postby bastafuerte » Wed Feb 29, 2012 8:20 pm

Hello, sometimes when i switch on the mixer, the desk tilt, and i have to take all the digital cards for resolve this.

Is this correct?

Thanks
bastafuerte
Registered user
 
Posts: 20
Joined: Fri Feb 17, 2012 11:05 pm

Re: my mackie d8b tilt

Postby Crash » Wed Feb 29, 2012 8:34 pm

What do you mean by tilt?
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1286
Joined: Fri Nov 21, 2008 10:05 pm

Re: my mackie d8b tilt

Postby anyhorizon » Wed Feb 29, 2012 10:31 pm

He's obviously a pinball wizard.

reteP
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: my mackie d8b tilt

Postby bastafuerte » Wed Feb 29, 2012 10:49 pm

I refer that when I ignite the console light and extinguish the lights and it does not ignite
bastafuerte
Registered user
 
Posts: 20
Joined: Fri Feb 17, 2012 11:05 pm

Re: my mackie d8b tilt

Postby anyhorizon » Thu Mar 01, 2012 12:11 am

Mate, you need a better language translation app. Many here to help but that's kinda difficult.

Peter
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: my mackie d8b tilt

Postby csp » Thu Mar 01, 2012 3:00 am

Peter,

I am guessing that he is trying to say that when he first turns on the power, the console lights up, then everything goes dead.

From his name, I gues that he is possibly from one of the Germanic type countries and it could possibly pay for him to briefly put his message into his native tongue to see if anyone here can translate it.

David
PS: you're becoming a bit of a grumpy sod in your "old age", or is it all the water down your way!!!!!!!!!
User avatar
csp
Premium Member
Premium Member
 
Posts: 679
Joined: Mon Dec 15, 2008 4:00 am
Location: Gold Coast region, Queensland, Australia

Re: my mackie d8b tilt

Postby anyhorizon » Thu Mar 01, 2012 4:06 am

csp wrote:Peter, PS: you're becoming a bit of a grumpy sod in your "old age", or is it all the water down your way!!!!!!!!!


Pardon?

Peter
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: my mackie d8b tilt

Postby bastafuerte » Thu Mar 01, 2012 4:50 pm

yes I am trying to say that when i first turns on the power, the console lights up, then everything goes dead. To fix this i move the source cable and after i do this, the console turns on.
What can i do to reslove this ?

Thank you a lot and sorry for my bad english
bastafuerte
Registered user
 
Posts: 20
Joined: Fri Feb 17, 2012 11:05 pm

Re: my mackie d8b tilt

Postby anyhorizon » Thu Mar 01, 2012 9:09 pm

If you are referring to the big round connector, make sure that you have turned it that final bit so that it "clicks" or "locks" into place. If you have done that, then I would suggest cleaning the pins or at least spraying some Deoxit on them. Otherwise, because the receptacle for that connector is on a PCB inside the desk, if proper restraint hasn't been applied, one or more of the solder joints may be intermittent and you will need to re-solder them to make them secure.

Peter
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: my mackie d8b tilt

Postby hyaena » Fri Mar 02, 2012 1:31 am

csp wrote:Peter,
From his name, I guess that he is possibly from one of the Germanic type countries and it could possibly pay for him to briefly put his message into his native tongue to see if anyone here can translate it.


Pardon ?

Manfred
User avatar
hyaena
Premium Member
Premium Member
 
Posts: 79
Joined: Tue Jan 18, 2011 1:20 am
Location: Bietigheim-Bissingen, Germany


Return to d8b Forum

Who is online

Users browsing this forum: Google [Bot] and 75 guests

cron