Does anyone need V2 EPROMs for their DIO boards?

[BrianJ]

Hey guys, was talking with Casey in another thread and he mentioned the need for Version 2 EPROMs that mackie is no longer producing...has anyone tried to duplicate the EPROMs? I have an EPROM burner an have done this for my old TC Electronics 1128 EQ's...

I would be willing to burn EPROMs for people, I'd just need a version 2 chip to read and duplicate. I don't have the DIO boards, only the OPT boards. So if anyone has a DIO board or even just a V2 EPROM let me know and I'll see if I can burn them...!

Thanks guys for all your help!

Brian

[Bilo2012]

Hi Brian,

i search for these Eproms, too.
So if you have the v2 image let me know.
Maybe you can ask Mackie Support for these
Image Files.

Best Regards

Bilo

[BrianJ]

All I need is an actual V2 eprom to read...looking for someone with a spare board, or even just a spare v2 chip...if someone is willing to let me borrow it I should be able to make these up for you guys...

[Bruce Graham]

Hey Lads, give me a hint at where I would find what you are looking for, The Version 2 Chip I mean.

I have 3 D8B's, and 2 CPU's. Is this chip in there?

Let me know whwn you can.

BG
Neustadt, Canada

[BrianJ]

The eprom chips we're talking about are on the DIO boards, Casey sent me his board and I was able to read the eprom and copy it! His version was version 2, 127...this is the middle version, the one that fixes the 24-bit issue, but still has the phase reversed.