Change font size   Print view

UFX card communication error

Discussion board for Mackie's d8b Digital Console users.

UFX card communication error

Postby OscarPro1 » Mon Sep 10, 2012 9:31 pm

Hi Guys,

I'm new to the d8b forum but have been browsing through it a while now. Although not new to the industry, I'm new to the Mackie d8bs that console. If anyone could kindly help me troubleshoot an issue I have with the UFX card and plugins installed I will be grateful. The d8b generally works fine, but I've had a few issues since installing the UFX card. All plugins have been Authorised and service pack 3 is installed. On UFX plugin load I can insert any plugin on the first stereo pair or two mono outs on the plugin configuration page or by using the setup menu on the console. When I load a plugin on the second stereo pair or mono out on the UFX card I get an Error #74 communication failure with card.
I've reseated the UFX card and MFX card and also switched slots, but the same occurs. Can you please help get to the bottom of this.
Knowledge is the beginning of Wisdom... Let the learning begin.
User avatar
OscarPro1
Premium Member
Premium Member
 
Posts: 66
Joined: Mon Jul 23, 2012 12:41 pm
Location: London

Re: UFX card communication error

Postby Crash » Mon Sep 10, 2012 10:29 pm

Can you get each card to work without error one at a time?

Here is a thread about that error.

http://www.sonido-7.com/forum/phpBB3/vi ... e543f9d27f
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1286
Joined: Fri Nov 21, 2008 10:05 pm

Re: UFX card communication error

Postby OscarPro1 » Mon Sep 10, 2012 11:29 pm

I'll give that a try and let you know..

Thanks :)
Knowledge is the beginning of Wisdom... Let the learning begin.
User avatar
OscarPro1
Premium Member
Premium Member
 
Posts: 66
Joined: Mon Jul 23, 2012 12:41 pm
Location: London

Re: UFX card communication error

Postby OscarPro1 » Mon Sep 10, 2012 11:41 pm

Just tried to run the UFX card on its own. Slots 9/10 load the plugins fine but slot 11/12 return the #74 communication failure message. The same applies when I try to load a stereo plugin in slot 11/12.

Still a dilemma Crash!
Knowledge is the beginning of Wisdom... Let the learning begin.
User avatar
OscarPro1
Premium Member
Premium Member
 
Posts: 66
Joined: Mon Jul 23, 2012 12:41 pm
Location: London

Re: UFX card communication error

Postby Crash » Tue Sep 11, 2012 5:24 pm

I am trying to get you to see if the card is the problem or maybe the physical slot in the console is the issue. Try moving it to slot A and see what happens there...just for a lack of anything else to try at the moment.

...and welcome to the forum by the way, sorry you are here due to an issue but hopefully one of us will get you sorted out.
User avatar
Crash
Premium Member
Premium Member
 
Posts: 1286
Joined: Fri Nov 21, 2008 10:05 pm

Re: UFX card communication error

Postby OscarPro1 » Tue Sep 11, 2012 6:03 pm

Thanks Crash.
Hopefully I'll pick up where everyone thus far has left off.
I've shifted slots and isolated the card. Same issue just on the bottom slots on the plugin configuration page, no matter what physical slot I place the card in. You may be right...The issue points towards the card itself. Maybe worth looking at buying another UFX card...:(
Knowledge is the beginning of Wisdom... Let the learning begin.
User avatar
OscarPro1
Premium Member
Premium Member
 
Posts: 66
Joined: Mon Jul 23, 2012 12:41 pm
Location: London


Return to d8b Forum

Who is online

Users browsing this forum: Google [Bot] and 65 guests

cron