Change font size   Print view

POPS

Discussion board for Mackie's d8b Digital Console users.

POPS

Postby Carlo » Sat Apr 12, 2014 9:02 pm

Dear All,

I'm experiencing a pop every now and then heard through the monitor speakers. I noticed that this is happening when the system is idle. I'm clocked thru an APOGEE clock card via MOTU 2408 MK2. I have another slave d8b but this happens when both the slave is switched on or off. Never had this issue when i was clocked thru ADAT and had the stock clock card installed. This all started when i start using the APOGEE clock card. :?:

how should i clock for best clocking performance? Should i use an external clock gear?

Any help and ideas?
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: POPS

Postby Casey_Pittman » Sun Apr 13, 2014 6:32 pm

Is the d8b the master clock or the slave?

-Casey
d8b V3 into RME HDSP 9652 with Cubase 7.5
User avatar
Casey_Pittman
Premium Member
Premium Member
 
Posts: 342
Joined: Mon Aug 31, 2009 10:51 pm
Location: Texas

Re: POPS

Postby Carlo » Sun Apr 13, 2014 7:33 pm

my d8b is the MASTER (master out from apogee to the wordclock in of the motu2408 then another word clock in into a second motu then to the slave d8b.
I'm using T-junctions to clock from one unit to the next and no daisy chain system.

Even if the slave d8b is switched off i get pops

There is something funny between the master d8b and the two motu's units
C
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: POPS

Postby FrankH » Sun Apr 13, 2014 8:04 pm

I'd try this before considering an external master clock for all involved.
Image
User avatar
FrankH
Premium Member
Premium Member
 
Posts: 375
Joined: Wed Nov 26, 2008 7:21 pm

Re: POPS

Postby Carlo » Sun Apr 13, 2014 8:32 pm

[quote][/quote]Hi FrankH
Thanks for the time. So you are proposing to go into the clock input of the 2408 and get out from its own Clock out?

Is the Apogee clock signal strong enough to feed the slave d8b and the motu instead of doing it in series?
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: POPS

Postby FrankH » Sun Apr 13, 2014 8:38 pm

You have the cables and T connector. Try it and see what happens.
User avatar
FrankH
Premium Member
Premium Member
 
Posts: 375
Joined: Wed Nov 26, 2008 7:21 pm

Re: POPS

Postby Carlo » Sun Apr 13, 2014 8:54 pm

cheers
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: POPS

Postby anyhorizon » Mon Apr 14, 2014 12:10 am

A pop when everything's idle doesn't seem like a word clock issue to me. Pops and clicks only occur when sync can't be achieved.

Peter
In the scheme of things, there isn't one... just chaos.
User avatar
anyhorizon
Premium Member
Premium Member
 
Posts: 1069
Joined: Fri Nov 21, 2008 9:36 pm
Location: Down under or up over, depending on where in space you are.

Re: POPS

Postby Carlo » Mon Apr 14, 2014 12:45 pm

anyhorizon wrote:A pop when everything's idle doesn't seem like a word clock issue to me. Pops and clicks only occur when sync can't be achieved.

Peter



Hi Peter,



I agree with you however if the system is idle and you try and change the clock source on the d8b or change the sampling rate ad hoc, you will experience a pop or click. Pops might happen also if there is something wrong in the chain and the d8b or the motu loses the sync for some reason whatsoever.

Thinking aloud...... :?:
If I have seen further it is only by standing on the shoulders of giants........
User avatar
Carlo
Premium Member
Premium Member
 
Posts: 431
Joined: Sat Jan 15, 2011 11:40 pm
Location: EU

Re: POPS

Postby Casey_Pittman » Tue Apr 15, 2014 1:29 am

So are you saying that you only hear the POPs when you change the sample rate and/or the word clock? Or do they happen at random times when you're not touching the console?

-Casey
d8b V3 into RME HDSP 9652 with Cubase 7.5
User avatar
Casey_Pittman
Premium Member
Premium Member
 
Posts: 342
Joined: Mon Aug 31, 2009 10:51 pm
Location: Texas

Next

Return to d8b Forum

Who is online

Users browsing this forum: Google [Bot] and 25 guests

cron